Sony RDP-M5iP User Manual

17
To play your music
1) Attach your iPod or iPhone to the System (see the procedure under “To attach your
iPod” or “To attach your iPhone”).
2) Power on your iPod or iPhone (see the manufacturer’s instructions for your iPod or
iPhone).
3) Power on the System (see the procedure “To power on the System” above).
4) Looking at the top of the System, locate the play/pause button. See Figure 11
below.
Figure 11 - Play/Pause Button
5) Press .
The System begins playing the music.
If you want to select another track to play, you have to use your iPod or iPhone to scroll
and select the track. See the manufacturer’s instructions for your iPod or iPhone for details.
You can also play your music and select a track using the remote commander. See “To
play your music” and “To select a track to play from your iPod or iPhone” under the
“Operating the Sony Personal Audio Docking System Remotely” section.
Play/Pause
Button

Sony RDP-M5iP Specifications

General

Driver diameter	50 mm
Frequency range	- Hz
RMS rated power	4 W
Audio output channels	2.0 channels
AUX in	Yes
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPhone, iPod
Battery type	AAA
Battery voltage	1.5 V
AC input voltage	100 - 240 V
Power source type	AC, Battery
Battery life (max)	10 h
Battery technology	Alkaline
Number of batteries supported	4
Product color	Black
Volume control	Digital
Speaker power	2 W
Dimensions (WxDxH)	226 x 184 x 165 mm

Weight and Dimensions

Weight	1100 g