Sony RDP-M5iP User Manual

30
Powering off the System
Powering off the System is a procedure that shows you how to power off the System using the
remote commander. The procedure provides you with step-by-step instructions and graphics
to help you learn how to complete this task. Powering off the System using the remote
commander enables you to power off the System remotely, when the System is not in use,
enabling you to save hydro costs or battery costs.
To power off the System
1) Point the remote commander at the remote sensor on the front of the System (see
Figure 14).
2) On the remote commander, locate the power I / button. See Figure 23 below.
Figure 23 - Remote Commander Power Button
3) Press I / on the remote commander.
Power I /
Button

Sony RDP-M5iP Specifications

General

Driver diameter	50 mm
Frequency range	- Hz
RMS rated power	4 W
Audio output channels	2.0 channels
AUX in	Yes
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPhone, iPod
Battery type	AAA
Battery voltage	1.5 V
AC input voltage	100 - 240 V
Power source type	AC, Battery
Battery life (max)	10 h
Battery technology	Alkaline
Number of batteries supported	4
Product color	Black
Volume control	Digital
Speaker power	2 W
Dimensions (WxDxH)	226 x 184 x 165 mm

Weight and Dimensions

Weight	1100 g