KDL-40XBR4/40XBR5/46XBR4/46XBR5
87
KDL-40XBR4/40XBR5/46XBR4/46XBR5
4-5. BEZEL ASSEMBLY AND LCD PANEL
201 X-2186-940-1 BEZEL ASSEMBLY(40)
(KDL-40XBR4 ONLY)
201 X-2178-014-2 BEZEL ASSY(40)
(KDL-40XBR5 ONLY)
201 X-2186-941-1 BEZEL ASSEMBLY(46)
(KDL-46XBR4 ONLY)
201 X-2178-015-2 BEZEL ASSY(46)
(KDL-46XBR5 ONLY)
202 X-2178-522-3 FRONT CABINET PRE ASSEMBLY (40)
(KDL-40XBR4/40XBR5 ONLY)
202 X-2178-860-3 FRONT CABINET PRE ASSEMBLY (46)
(KDL-46XBR4/46XBR5 ONLY)
(KDL-40XBR4/40XBR5 SN 8,000,001 to 8,199,999 and SN 8,500,001 to 8,599,999 Only)
203 1-802-489-13 LCD PANEL (40INCH FHD HFR) [204]
NOTE: This panel must be used in conjunction with FB1 BOARD, COMPLETE A-1362-640-A
204 1-789-838-11 (BALANCER BOARD) ETC-INVERTER MT BOARD
(KDL-40XBR4/40XBR5 SN 8,200,001 to 8,499,999 and SN 8,600,001 and Up Only)
203 1-802-489-31 LCD PANEL (40INCH FHD HFR) [204]
NOTE: This panel must be used in conjunction with FB1 BOARD, COMPLETE A-1418-997-A
204 1-789-838-21 (BALANCER BOARD) ETC-INVERTER MT BOARD
(KDL-46XBR4/46XBR5 SN 8,000,001 to 8,199,999 and SN 8,500,001 to 8,599,999 Only)
203 1-802-491-12 LCD PANEL (46INCH FHD HFR) [204-205]
NOTE: This panel must be used in conjunction with FB1 BOARD, COMPLETE A-1362-640-A
204 1-789-839-11 (BALANCER BOARD) ETC-INVERTER MT BOARD (LF)
205 1-789-840-11 (BALANCER BOARD) ETC-INVERTER MT BOARD (RT)
(KDL-46XBR4/46XBR5 SN 8,200,001 to 8,499,999 and SN 8,600,001 and Up Only)
203 1-802-491-31 LCD PANEL(46INCH FHD TFT) [204-205]
NOTE: This panel must be used in conjunction with FB1 BOARD, COMPLETE A-1418-997-A
204 1-789-972-11 (BALANCER BOARD) ETC-INVERTER MT BOARD (LF)
205 1-789-973-11 (BALANCER BOARD) ETC-INVERTER MT BOARD (RT)
2-580-654-01 SCREW, +PWTP2 4X16
2-687-999-01 SCREW, LINE HEX PSW M3X12
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
202
201
205
204
203
☛
☛
NOTE: Les composants identifi es per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
NOTE: The components identifi ed by shading
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
☛
☛
☛
To Next Page
Loading...
