Sony RMT-VB201D - KEM-481 AAA;C2 R Packing and Decode Jig

1-6
1-4-6. KEM-481AAA/C2R part packing
❶
Open the box
❷
Take out Top Cushion
❸
❹
❻ ❺
Take out BU
‘Holding area’
Do not touch the area!!
❽
❾
Take out BU from
antistatic bag
Do not re-use antistatic bag!!
❼
KEM-481AAA/C2R master carton packing
Top cushion
Antistatic bag
KEM-481AAA/C2R
Cushion carton
Manual
instruction
Chamfer cut
facing front
Individual
carton
PP tape
Shipment label
1) 1 piece of BU KEM-481 inside antistatic bag and excess part of
bag is folded back.
2) The BU KEM-481 and Manual instruction are put into Cushion
tray (PSFM) with Top cushion on it stored in individual carton.
3) 40pcs of individual carton are stored in master carton.
4) Seal is attached to top and bottom of carton with PP tape. (So
called “H” shape)