Sony RMT-VB201D - Service Mode Functions; Entering Service Mode and Diag Menu

5-1
SECTION 5
SERVICE MODE AND ERROR LOG LIST
■ Enter Service Mode
Connect the set to AC, and wait initialization cycle complete .
Power ON set into normal mode. When User Interface screen (UI) appear,
Use Sony BDP remote controller, key in the following SIRCS code.
[STOP] -> [Display] -> [PAUSE] -> [
↑] cursor-up
While sending of SIRCS code, wait time between each key code must be within 3 second. If 3 second waiting is exceeded user have to
re-key in the SIRCS code.
If SIRCS enter is successful, set will auto boot up and FLD will display SERVC [FLD available MODEL]. The screen of service mode is
displayed on a monitor.
Control via Remote Controller
• Diag
The unit test of the device mounted on the MainBoard.
• Display Error Log
Error log is displayed.
The displayed logs can be saved in a USB memory.
• Factory Initialize
Return all of the player setting to their factory defaults.
• Network
Confirm Wired Network connection.
• System Information
System information of the set is displayed.
The Information on a soft version and drive information, etc. is displayed.
• Drive
Write Drive OP Data and check drive.
Main function