Tips
• To set the channel, you can also use the CH+/- or number buttons.
• You can set the channel with the shuttle ring during stop.
• To set the tape speed, you can also use the SP/EPbutton.
• When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 101).
• If you want to return to the previous menu and continue with other operations after
setting the timer, press {, to highlight RETURN, then press OK.
The display returns to the MENU screen.
If you are finished using the VCR, turn off the power before the timer recording
starts.
Notes
• If you are using cable box control, you cannot select "LI" or "L2".
,' The station ID appears on the TV screen only when you complete Smart Channel
Mapping and the VCR receives the program information signal (see page 59).
_!i__i
Basic Operations 79
To Next Page
Loading...
