Sony SLV-E205EY - Page 5

Front unloading cannot be performed
when ejecting the cassette.
(Front loading can be performed.)
Front loading and front unloading
cannot be performed when ejecting
the cassette.
The mechanism becomes 1 (REVIEW)
while moving from 2 (IDLER), 3(STILL),
4 (BRAKE), and to 5 (STOP).
The mechanism becomes 7 (INITIAL)
while moving from 1 (REVIEW), 2
(IDLER), 3(STILL), 4 (BRAKE), and to
The cassette drive mechanism is
faulty.
The front door is caught.
The tape cassette is caught in the
cassette drive mechanism.
The main cam and front rack gear of
the front loading mechanism have
not engaged properly.
The gears of the front loading
drive mechanism have not en-
gaged properly.
The mechanism mode switch con-
tact is faulty.
The mechanism mode switch con-
tact is faulty.
Front loads and shifts to the STOP or
INITIAL mode.
* When the power switch is turned on
before eject operations: Shifts to the
STOP mode.
When the power switch is turned off
before eject operations: Shifts to the
INITIAL mode and the power goes
off.
The power is forcibly turned off with
the mechanism at its current position.
The power is forcibly turned off with
the mechanism at its current position.
Carries out tape take-up operations,
shifts to the INITIAL mode, and the
power goes off.
5 (STOP).
Note: For details of mechanism operations corresponding to the mechanism positions of the self-diagnosis numbers 08 and
09 above, refer to the separate volume on the V95 I mechanism manual.
These manual reference numbers are shown in the cover.
Mechanism Mode Display Contents
VIDEO INSERT
VIDEO INSERT ~ PAUSE
AUDIO/VIDEO INSERT
REVERSE X2 SPEED PLAY
CASSETTE OUT
STANDBY
STOP
al
AUDIO DUBBING
X2 SPEED PLAY
CUE
REVIEW
FAST FORWARD
REWIND
STILL
REC-PAUSE
AUDIO DUBBING - PAUSE
FRAME ADVANCE
SLOW
OTHERS