Sony SRG-A40 - Specifications

96
Specifications
System
Video signal 3840 × 2160/29.97p *
1
1920 × 1080/59.94p
1920 × 1080/59.94i
1920 × 1080/29.97p
1280 × 720/59.94p
3840 × 2160/25p *
1
1920 × 1080/50p
1920 × 1080/50i
1920 × 1080/25p
1280 × 720/50p
3840 × 2160/23.98p *
1
1920 × 1080/23.98p
*1
SDI output is not supported.
Details of each model (page 100)
Synchronization
Internal synchronization
Image device 1/2.5-type, CMOS image sensor
Effective pixel number: Approx.
8.5 Megapixels
Camera
Lens Optical, 20 ×
f = 4.4 mm to 88.0 mm,
F2.0 to F3.8
f = 26.8 mm to 536.0 mm (35 mm
c
amera conversion) (SRG-A40)
Optical, 12 x
f = 4.4 mm to 52.8 mm, F2.0 to F3.7
f = 26.8 mm to 322.8 mm (35 mm
c
amera conversion) (SRG-A12)
Minimum object distance
80 mm (WIDE), 800 mm (Tele)
(S
RG-A40)
80 mm (WIDE), 400 mm (Tele)
(S
RG-A12)
Minimum illumination
1.6 lux 4K/HD output, 50IRE, F2.0,
1/3
0s, High-sensitivity Mode:
OFF
Max.Gain (Wide end)
Shutter speed
1/10000s to 1/1s
Pan/Tilt function
Horizontal ±170 degrees
Maximum speed: 101 degrees/
se
cond
Minimum speed: 0.5 degrees/
se
cond
Maximum speed (when the
pr
eset is recalled): 300
degrees/second
Minimum speed (when the
pr
eset is recalled): 1.1 degrees/
second
Vertical +90 degrees, –20 degrees
Maximum speed: 91 degrees/
se
cond
Minimum speed: 0.5 degrees/
se
cond
Maximum speed (when the
pr
eset is recalled): 126 degrees/
second
Minimum speed (when the
pr
eset is recalled): 1.1 degrees/
second
Output terminals
HDMI Terminal: HDMI connector (Type
A) × 1
Color space: YCbCr, 4:2:2 8bit
R
GB, 4:4:4 8bit
SDI OUT Terminal: BNC connector × 1
Standards: 3G-SDI
Input and Output terminals
VISCA RS-422 Terminal: RJ45 × 2
Standards: VISCA
LAN terminal Terminal: RJ45
Standards: PoE++ (IEEE802.3bt
T
ype4 Class8 compliant)
Input terminals
MIC Terminal: Mini-phone ø 3.5 Stereo
(×1) (Plug in Power supported)
Power terminal
IEC60130-10 (JEITA standard RC-
53
20A) TYPE 5
General
Input voltage DC 19.5 V (AC adapter 100 to 240 V,
50/60 Hz), PoE++ (IEEE802.3bt
Type4 Class8 compatible)
Power consumption
For DC 19.5 V: 80 W
For PoE++ (IEEE802.3bt Type4
Cla
ss8 compliant): 71.3 W