54
[UPnP] tab
Set UPnP (Universal Plug and Play).
Discovery]
[Enable]
When this function is enabled, you can
search the camera by using UPnP. Select the
checkbox to use NDI|HX.
Setting the Security
— [Security] Menu
When you click in the Administrator
menu, the [Security] menu appears.
The [Security] menu consists of the [User] and
[Access limit] tabs.
Administrator and User
This camera identifies those who log in as the
“Administrator” or “User”.
The “Administrator” can use all the functions of
this camera, including camera settings.
“User” can select user sections specified as
available functions (access rights) in the [Viewer
mode]. User section includes [Administrator]
which can set all the functions as well as [Full]
and [Light].
Each type of user can use the corresponding
functions below.
Usable function, – Not usable function
Function
Administrator
User
Full Light
Monitor a live image
View the date and time
Control the image view
size
Save a still image and
movie in the computer
Perform the pan/tilt/
zoom/focus operation
–
Perform the tally control –
Recall a preset –
Set a preset ––
Control the setting
menu
––
Control the power ––
To Next Page
Loading...
