59
[Video port number], [Audio port number]
Specify the video data and audio data
transmission port numbers used for RTSP
multicast streaming. Specify a number from
[1024] to [65534].
[RTMP setting]
[Publish to server]
Select the checkbox to enable RTMP.
[Video encode type]
Displays the type of video encoding.
[Audio encode type]
Displays the type of audio encoding.
[Resolution format]
Displays the image format.
[Chunk size]
Displays the chunk size in the RTMP chunk
stream.
[RTMP server status]
Displays the RTMP server status.
[RTMP URL]
Displays the RTMP URL.
[MPEG-TS setting]
[Enable]
Select the checkbox to allow MPEG-TS
streaming. When you have selected the
checkbox, set [IP address] and [Port number]
appropriately.
[IP address]
Set the destination IP address.
[Port number]
Set the destination port number.
[SRT setting]
[Enable]
Select the checkbox to allow streaming.
[Destination IP]
Set the destination IP address.
[Port number]
Set the destination port number.
[Latency]
Select the latency from [20] ms to [8000] ms.
[Encryption]
Set the encryption type. Select from [None],
[AES-128], or [AES-256].
Using NDI|HX
To use NDI|HX, you are required to purchase the
license key.
Purchasing the license key
You can purchase the license key from the
following URL of NewTek, Inc.
http://new.tk/ndi_sony
Notes
• Download the latest driver of NDI|HX and
install it in NewTek products.
• For details on settings and operations for
NDI|HX, refer to the instructions of NewTek
products.
Services and software provided by other
companies
• Separate terms and conditions of use may
be applied.
• Provision of services and software updates
may be interrupted or terminated without
notice.
• Services and software content are subject to
change without notice.
• Separate registration and/or payment may
be required.
Please note that Sony Corporation is not
responsible for any claim, from customers or
third parties, arising from any use of services
and software provided by other companies.
To Next Page
Loading...
