161
Menu List
Appendix
310 EDIT PRESET
REPLACE
CHANNEL SELECT
Specifies the channel of the edit preset command to be
assigned with the edit preset settings for each channel.
Sub item
REPLCE CH SEL [disable]
enable
disable: The setting in this menu is disabled and the
settings in the REPLACE MODE menu and the
ANALOG REPLACE menu are used.
enable: The setting in this menu is enabled.
REPLCE TR1 CH1 to [CH1] to CH12 The edit preset setting of this track turns on or off according
to CH12 to the specified channel of the edit preset
command.
REPLCE TR2 CH1 to [CH2] to CH12
REPLCE TR3 CH1 to [CH3] to CH12
REPLCE TR4 CH1 to [CH4] to CH12
REPLCE TR5 CH1 to [CH5] to CH12
REPLCE TR6 CH1 to [CH6] to CH12
REPLCE TR7 CH1 to [CH7] to CH12
REPLCE TR8 CH1 to [CH8] to CH12
REPLCE TR9 CH1 to [CH9] to CH12
REPLCE TR10 CH1 to [CH10] to CH12
REPLCE TR11 CH1 to [CH11] to CH12
REPLCE TR12 CH1 to [CH12]
311 EDIT PRESET
REPLACE MODE
SELECT
[normal]
parallel
reverse
stereo
normal: Assigns edit preset command channels 1 to 8, to
track channels 1 to 8.
parallel: Assigns edit preset command channels 1 to 4, to
channel pairs 1/5 to 4/8.
reverse: Assigns edit preset command channels 1 to 4 to
channels 5 to 8, and channels 5 to 8 to channels 1 to 4.
stereo: Assigns edit preset command channels 1 to 4 to
track channel pairs 1/2 to 7/8.
312 ANALOG AUDIO
EDIT PRESET
REPLACE
[no def]
ch1
ch2
ch1+2
When the edit presets for VTR channels 9 to 12 are
specified by an editor or remote controller, these are set on
or off according to the analog audio edit presets.
no def: Not set.
ch1: Follows analog channel 1 edit preset.
ch2: Follows analog channel 2 edit preset.
ch1+2: Follows the edit preset for analog channel 1 or
analog channel 2.
Sub items
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH9
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH10
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH11
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH12
Item number Item Setting Function
To Next Page
Loading...
