183
Menu List
Appendix
836 SD AUDIO
OUTPUT
EXCHANGE
Makes independent track selections for the audio (channels
1 to 8) to be multiplexed into SD SDI.
Sub items
SDOUT EXCG [disable]
enable
disable: Follow the settings of DIGOUT EXCHNG menu
CH1 to CH8.
enable: Enable the settings of this menu.
SD OUT CH1 [TR1]
TR12
Specifies the signal tracks to assign to audio channels 1 to
8 for multiplexing with SD SDI output.
SD OUT CH2 TR1
[TR2]
TR12
SD OUT CH3 TR1
[TR3]
TR12
SD OUT CH4 TR1
[TR4]
TR12
SD OUT CH5 TR1
[TR5]
TR12
SD OUT CH6 TR1
[TR6]
TR12
SD OUT CH7 TR1
[TR7]
TR12
SD OUT CH8 TR1
[TR8]
TR12
840 AES/EBU INPUT
MODE
[AUTO]
48K VLOCK
When recording in the HDCAM-SR format, specifies
whether to pass signals input to the DIGITAL I/O (AES/
EBU) INPUT connector through the rate converter.
AUTO: Input signals pass through the rate converter. In this
case, there are no limitations on input signals.
48K VLOCK: Input signals do not pass through the rate
converter. In this case, input signals must be locked to
video signals at 48 kHz. Noise will occur if this
condition is not met.
Item number Item Setting Function
To Next Page
