196
LUT File Formats Applicable to This Board
Appendix
LUT file type 3: R, G, and B have individual values
(individual curves) and are aligned horizontally
“LUT10” in the header indicates the bit depth of the output
is 10 bits.
The bit depth of the input is determined by the maximum
number of lines.
(This is an example of 10-bit input and 10-bit output.)
LUT file type 4: R, G, and B have individual values
(individual curves) and are aligned horizontally
The bit depth is not indicated in the header. It is
automatically determined by the number of lines and their
values.
(This is an example of 10-bit input and 10-bit output.)
LUT file type 5: R, G, and B have individual values
(individual curves) and are aligned horizontally
The bit depth is not indicated in the header. It is
automatically determined by number of lines and their
values.
There are no lines for input values.
(This is an example of 10-bit input and 10-bit output.)
# Comment
LUT: 3 1024
# (Line No,) Output value
L1 0
L2 0
L3 1
•
•
•
L1023 1023
L1024 1023
L1025 0
L1026 0
L1027 1
•
•
•
L2047 1023
L2048 1023
L2049 0
L2050 0
L2051 0
•
•
•
L3071 1022
L3072 1023
# Comment
LUT10
# (Line No,) Input
value
Output R Output G Output B
L1 0 2 2 2
L2 1 2 2 2
L3 2 2 2 2
•
•
•
L1023 1022 1023 1023 1023
L1024 1023 1023 1023 1023
# Comment
# (Line No,) Input
value
Output R Output G Output B
L1 0 2 2 2
L2 1 2 2 2
L3 2 2 2 2
•
•
•
L1023 1022 1023 1023 1023
L1024 1023 1023 1023 1023
To Next Page
Loading...
