The following illustration shows how to
connect a DVD player and DVD recorder.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Note
Tu input multi chaunel digital audio from tile DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
Tip
All the digital audio jacks are cumpatible with
32 kHz. 44.1 kHz. 48 kHz. and 96 kHz sampling
frequencies.
Connecting a DVD player
DVD player
Audio signals
O Coaxial digital cord (not supplied)
OAudio cord (not supplied)
_Video cord (not supplied)
O Component video cord (not supplied)
22us
To Next Page
Loading...
