Sony STR-DN1000 - Settings for the S-AIR (S-AIR Settings Menu)

82
US
Settings for the S-AIR
(S-AIR Settings menu)
You can make the required settings when you
have connect the S-AIR sub unit to the
EZW-T100 slot.
x S-AIR ID (S-AIR ID)
Lets you set the ID to match the S-AIR main
unit with S-AIR sub unit. For details, see
“Establishing sound transmission between the
S-AIR main unit and S-AIR sub unit (ID
setting)” (page 100).
x Pairing (Pairing)
Lets you pair your S-AIR main unit with the
specific S-AIR sub unit. For details, see
“Pairing the S-AIR main unit with a specific S-
AIR sub unit (Pairing operation)” (page 102).
x S-AIR Mode (S-AIR mode)
You can enjoy the system’s sound in another
room by using the S-AIR receiver. For details,
see “Enjoying the system’s sound in another
room” (page 104).
x RF Change (RF change)
You can improve the transmission by
changing the channel. For details, see
“Changing the channel for better sound
transmission” (page 105).
x S-AIR Stby (S-AIR standby)
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode. For
details, see “Enjoying the S-AIR receiver
while the S-AIR main unit is in standby mode”
(page 107).
Operating without
connecting to a TV
You can operate this receiver using the display
even if you do not use a GUI when a TV is not
connected.
Press GUI MODE repeatedly to
select “MENU OFF”.
When “GUI” is displayed in the display, the
menu is set to display on the TV screen using
a GUI.
1 Press AMP.
2 Press MENU.
3 Press V/v repeatedly to select
the menu you want.
4 Press or b to enter the
menu.
S-AIR Settings menu parameters
Using the menu in the display
1 2 3
4 5 6
7 8 9
-/-- 0/10
ENT/MEM
2CH/
A.DIRECT
A.F.D. MOVIE MUSIC
CLEAR / >10
SHIFT
RESOLUTION
.
>
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI 3HDMI 2HDMI 1
HDMI 4
SA-CD/
CD
DMPORTTUNER
< <
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY
GUI MODE
O
DVD
INPUT
MODE
SLEEP
NIGHT
MODE
TV AMP
– CATEGORY +
V/v/B/b,
GUI MODE
MENU
AMP
RETURN/
EXIT O