Sony STR-DN2010 - Adjusting Settings; Using the Settings Menu

107
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right
STR-DN2010
4-182-049-11(1)
Adjusting Settings
Using the Settings menu
You can adjust various settings for speakers,
surround effects, etc. using the Settings menu.
To display the menu of the receiver on the TV
screen, make sure that the receiver is in “GUI
MODE” by following the steps in “To turn
“GUI MODE” on and off” (page 52).
1 Press GUI MODE.
After “GUI ON” appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select
“ Settings”, then press or
b to enter the menu mode.
The Settings menu list appears on the TV
screen.
3 Press V/v repeatedly to select
the menu item you want, then
press .
Example: When you select “Auto
Calibration”.
4 Press V/v repeatedly to select
the parameter you want, then
press .
To return to the previous screen
Press RETURN/EXIT O.
To exit the menu
Press MENU.
Adjusting Settings
V/v/b,
GUI MODE
MENU
RETURN/
EXIT O
Calibration Start
Calibration Type
Position :
Pos. 1
Auto Calibration
OPTIONS
Function List
continued