Customizing Sound Fields
m
.=
o
5'
0_
0_
o
€
Front speaker treble adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustment".
• Tile gain call be adjusted _+10dB in 1 dB steps.
• The f'equency call be adjusted fl'om 1.0 kHz to 10 kHz
ill 23 steps.
Center speaker bass adjustment (Gain/Frequency)
Adjust as described in "Front speaker bass adjustment".
• The gain call be adjusted _+10dB in 1 dB steps.
• Tile f'equency call be adjusted fl'om 99 Hz to 1.0 kHz in
21 steps.
Center speaker midrange adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustment".
• The gain call be adjusted _+10dB in 1 dB steps.
• Tile f'equency call be adjusted fl'om 198 Hz to 10.0 kHz
ill 37 steps.
Center speaker midrange bandwidth
This tgarainmeter lets you adjust the width of the
midrange band.
• "WIDE" provides a wide band centered on the selected
fl'equencN tot general adjustments.
• "MIDDLE" provides a norlnal band.
• "NARROW" provides a narrowband centered on the
selected fl'equency, for specific adjustments.
Center speaker treble adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustment".
• The gain call be adjusted _+10dB in 1 dB steps.
• Tile f'equency call be adjusted fl'om 1.0 kHz to 10.0 kHz
ill 23 steps.
Rear L/R speaker bass adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustment".
• The gain call be adjusted _+10dB in 1 dB steps.
• The f'equency call be adjusted fl'om 99 Hz to 1.0 kHz in
21 steps.
Rear L/R speaker midrange adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustment".
• Tile gain call be adjusted +10 dB in 1 dB steps.
• The f'equency call be adjusted fl'om 198 Hz to 10.0 kHz
ill 37 steps.
Rear L/R speaker midrange bandwidth
This parammeter lets you adjust tile width of the
midrange band.
• "WIDE" provides a wide band centered on the selected
frequencN for general adjustments.
• "MIDDLE" provides a normal band.
• "NARROW" provides a narrowband centered on the
selected frequencN tbr specific adjusmlents.
Rear L/R speaker treble adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustinent".
• Tile gain call be adjusted +10 dB ill 1 dB steps.
• Tile frequency call be adjusted f'oln 1.0 kHz to 10.0 kHz
in 23 steps.
Rear center speaker bass adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adfllstinerlt".
• Tile gain call be adjusted +10 dB ill 1 dB steps.
• The frequency call be adjusted f'oln 99 Hz to 1.0 kHz ill
21 steps.
Rear center speaker midrange adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjusmlerlt".
• Tile gain call be adjusted _+10dB ill 1 dB steps.
• Tile frequency call be adjusted f'oln 198 Hz to I0.0 kHz
in 37 steps.
Rear center speaker midrange bandwidth
This parammeter lets you adjust tile width of the
midrange band.
• "WIDE" provides a wide band centered on the selected
frequencN tbr general adjusti'aents.
• "MIDDLE" provides a normal band.
• "NARROW" provides a narrowband centered on the
selected frequencN for specifc adjustments.
Rear center speaker treble adjustment (Gain/
Frequency)
Adjust as described in "Front speaker bass adjustinent".
• Tile gain call be adjusted _+10dB ill 1 dB steps.
• Tile frequency can be adjusted f'om 1.0 kHz to 10.0 kHz
ill 23 steps.
1
2
If the power is on, press I/_ to turn off the power.
Hold down MODE + and press I/_).
"S.F Initialize" appears ill the display and all sound
felds are reset at once.
4O
To Next Page
Loading...
