Sony STR-V555ES - Recording on a Video Tape; Using the Sleep Timer

Recording Using the Sleep Timer
o
€0
o
"o
€0
=a
You can record fi'om a VCR, a TV, or an LD player using
the receiver. You can also add audio from a variety of
audio sources when editing a video tape. See your VCR
or LD player's instruction manual if you need help.
1 Select the program source to be recorded.
2 Prepare the component for playing.
For example, insert the laser disc you want to record
into the LD player.
3 Insert a blank video tape into the VCR (VIDEO 1 or
VIDEO 2) for recording.
4 Start recording on the recording VCR, then start
playing the video tape or laser disc you want to
record.
,,o
"_° Youcanrecord the sound from anyaudio sourceonto a
videotape whilecopyingfrom a videotape or laserdisc
Lorate tbe point wbere you want to start rerording fi'om anotber
audio source, select the program source, then start playback. The
audio fi'om that source will be recorded onto the audio track of
the video tape instead of the audio fi'om the original medium.
To resume audio recording flora the original medium, select the
video source again.
Notes
• Please be sure to make both digital and analog connections to
tbe TV/SAT and DVD/LD inputs. Analog recording is not
possible if you only make digital connections.
• Some sources contain copy guards to prevent recording. In this
case, you may not be able to record fi'om the sources.
• The analog audio signals of the currect function is output fl'on'J
the REC OUT jacks. When you use AUDIO SPLIT to assign a
digital audio input (fur example, MD/DAT OPTICAL), the
analog audio signals of the assigned audio (fUr example, MD/
DAT ANALOG) is output.
• When 5.1CH INPUT is selected, audio signals are not output
from REC OlITjacks.
You can set the receiver to turn off automatically at a
specified time.
Press SLEEPon the front panel (except for models of
area code CED) or on the remote while the power is
on.
Each time you press SLEEP, the time changes as shown
below.
-*2:00:00---+ 1:30:00--+ 1:00:00---+0:30:00---+OFF "7
i
The display dims after you have specified the time.
"_° You canfreely specify the time
First, press SLEEP,then sperify tbe time you want using tbe jog
dial on the receiven The sleep time changes in 1minute intervals.
You can specify up to 5 horns.
"_° You cancheckthe time remaining before the receiver turns
off
Press SLEEP. The remaining time appears in the display.
54