Preset Tuning
;o
¢D
<
5'
¢0
=a
=a
_e
p_
For details on the buttons used in this section, see "Brief
descriptions of buttons used to receive broadcasts" on
page 46.
Before tuning to preset stations, be sure to preset theln by
performing steps on "Presetting radio stations" below.
1 Rotate FUNCTION to select the tuner,
The last received station is tuned in.
2 Tune in the station that you want to preset using
Direct Tuning (page 47) or Automatic Tuning (page
47).
3 Press MEMORY.
"MEMORY" appears in tire display fin" a few seconds.
Do Steps 4 and 5 before "MEMORY" goes out.
4 Press PRESETTUNING + or PRESETTUNING - to
select a preset number.
If "MEMORY" goes out before you press the preset
numben start again from Step 3.
5 Press MEMORY again to store the station.
If "MEMORY" goes out befZ_re you press the preset
nunfl)er, start again froln Step 3.
6 Repeat Steps 2 to 5 to preset another station.
To change a preset number to another station
Do Steps 1 to 6 to preset tire new station to the number.
Note
If the AC power cord is disconnected for about two weeks, all the
preset stations will be cleared flora the receiver's memory, and
you will have to preset the stations again.
You can tune the preset stations either of the following
two ways.
Scanning the preset stations
1 Rotate FUNCTION to select the tuner.
Tire last received station is tuned in.
Press PRESETTUNING + or PRESETTUNING -
repeatedly to select the preset station you want.
Eaeh tii'ne you press the button, the reeeiver tunes in
one preset station at a time, in tire corresponding order
and direction as tbllows:
Using the preset codes
Use the supplied remote to perform tire following
operations. For details on the buttons used in this section,
see the operating instructions for the supplied remote.
1 Rotate FUNCTION to select the tuner.
Tire last received station is tuned in.
For remotes without a display:
Press SHIFT to select a memory pare (A, B, or C),
then press the preset number of the station you
want using the numeric buttons on the supplied
remote.
For remotes with a display:
Select the preset station you want from the list
displayed on the supplied remote when TUNER is
selected.
48
To Next Page
Loading...
