EasyManua.ls Logo

Sony STR-V555ES - Basic Functions and Automatic Function Selection; Basic Functions; Automatic function selection; Synchronized Recording

Sony STR-V555ES
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONTROL A1 II Control System
o
e_
-R
o
"o
"R
e_
The CONTROL AI II functions will operate as long as the
COlnponent you want to operate is turned on, even if all of
[he other conilected coi_lporlents are not turned on.
Automatic function selection
When you connect a CONTROL AIII compatible Sony
amplifier (or receiver) to other Sony components using
monaural mini plug cords, the function selector on the
amplifier (or receiver) automatically switches to the
correct input when you press the play button on one of
the connected components.
Notes
You must connect a CONTROL A1 compatible amplifier
(receiver) using a monaural mini plug cord in order to take
advantage of the automatic f\mction selection feature.
This ffmction only works when the components are connected
to the amplifier (or receiver) inputs according to the names on
the function buttons. Certain receivers allow you to switch the
names of the function buttons. In this case, refer to the
Operating Instructions supplied with the receive1:
When recording, do not play any components other than the
recording source. It will cause the automatic flmction selection
to operate.
Synchronized recording
This f\mction lets you conduct synchronized recording
between the selected source and recorder components.
1 Set the function selector on the amplifier (or
receiver) to the source component.
2 Set the source component to pause mode (make
sure both the I1_ and II indicators light together).
3 Set the recorder component to the REC-PAUSE
mode.
4
Press PAUSE on the recorder component.
The source component is released from the pause
mode, and recording begins shortly thereafter.
When playback ends from the source component,
recording stops.
Notes
Do not set more than one romponent to the pause mode.
Certain recorder components may be equipped with a special
synchronized recording ftmction that uses the CONTROL A11I
Control System, like "CD Synchro Dubbing". In this case, refer
to the Operating Instructions supplied with the recorder
coi_lponent.
58

Related product manuals