Tables of Settings Using SURROUND, LEVEL, EQ, and SET UP
buttons
You can make various settings using the LEVEL, SURROUND, EQ, SET UP buttons,jog dial, and cursor buttons. The tables
below show each of the settings that these buttons can make.
Pressand light
SIIRROUND button
LEVEL button
Press _ or _ to select
6.1 MATRIX IXXXXl
PRO LOGIC IXXXXl
EFFECT I I
WALL S I H
REVERB S I L
FRONT REVERB IXXXXI
SCREEN DEPTH IXXXXI
VIR. SPEAKERS IXXXXI
REAR ENHANCER
BASS GAIN XXXdB
BASS FREQ. XXXXHz
MID GAIN XXXdB
MID FREQ. XXXXHz
MID SLOPE IXXXXI
TRE. GAIN XXX dB
TRE. FREQ. XXXXHz
FRONT L I R
REAR L I R
CENTER XXXdB
REAR L/R XXX dB
REAR CENTER XXXdB
SUB WOOFER XXXdB
LFE MIX XXXdB
dts LFE MIX XXXdB
D. RANGE COMP. XXX
Turnjog dial to select See page
AUTO, ON, OFF 36
AUTO, ON, OFF
depends oil sound mode (in 21 steps)
between 8 to +8 (in 1increment steps)
between 8 to +8 (in 1increment steps)
DRY,STANDARD, WET
DEEP,MID, OFF
ON, OFF
ON, OFF
between 10dB to +10 dB (in 1 dB steps)
between 99 Hz and 1.0kHz (in 21steps)
between 10dB to +10 dB (in 1 dB steps)
between 198 Hz and 10.0 kHz (in 37steps)
WIDE, MIDDLE NARROW
between 10dB to +10 dB (in 1 dB steps)
between 1.0kHz and 10.0kHz (in 23 steps)
between 8 dB to +8 dB (in 1 dB steps) 38
between 8 dB to +8 dB (in 1 dB steps)
between 10dB to +10 dB (in 1 dB steps)
between 10dB to +10 dB (in 1 dB steps)
between 10dB to +10 dB (in 1 dB steps)
between 10dB to +10 dB (in 1 dB steps)
OFF,or 20 dB to 0 dB (in 1 dB steps)
OFF,or 20 dB to +10 dB (in 1 dB steps)
OFF,0.1 to 0.9 (in0.1 dB steps), STD, or MAX
Q,
a*
3
65
To Next Page
Loading...
