Sony STR-ZA5000ES - Connecting 7.1.4-channel speaker system using an additional stereo power amplifier

Monaural audio cable (not supplied)
Speaker cable (not supplied)
Note
After you have installed and connected your speakers, set the speaker pattern to [7.1.2 (FD)] using
[Speaker Pattern] in the [Speaker Setup] menu.
[18] Preparation 2. Connecting speakers
Connecting 7.1.4-channel speaker system using an
additional stereo power amplifier
Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see “How to connect speaker
cables.”
Monaural audio cable (not supplied)
Speaker cable (not supplied)
Audio cable (not supplied)
Stereo power amplifier (not supplied)
Note
After you have installed and connected your speakers, set the speaker pattern to [7.1.4 (TF+TR)]
using [Speaker Pattern] in the [Speaker Setup] menu.
[19] Preparation 2. Connecting speakers
Connecting 7.1-channel speaker system with Zone 2
connection
Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see “How to connect speaker
cables.”