Enjoying an input source from a connected device immediately (One-Touch Play
function) [74]
Selecting the optimum picture quality and sound field automatically (Scene Select
function) [75]
About Home Theatre Control function [76]
Operating the receiver menu using the TV remote control (Remote Easy Control
function) [77]
Echo Canceling function [78]
About Language Follow function [79]
Enjoying video and sound with your desired way of use
Switching the monitors that output the HDMI video signals [80]
Switching between digital and analog audio (Input Mode) [81]
Using other video/audio input jacks (Input Assign) [82]
Saving and recalling various settings for the receiver (Custom Preset)
About Custom Preset [83]
Saving the settings to a preset [84]
Recalling the settings saved to the scene [85]
Items for which you can save settings and the default values for each item [86]
Using the sleep timer
Using the sleep timer (Sleep) [87]
Checking information on the receiver
Viewing information on the display panel [88]
Adjusting Settings
Easy Setup
Setting up the receiver using the Easy Setup [89]
Input Setup
Changing the assignment and display for the input jacks [90]
Changing the name for each input (Name) [91]
Speaker Setup
1. About Auto Calibration [92]
2. Before you perform Auto Calibration [93]
3. Connecting the optimizer microphone [94]
4. Selecting the front speakers [95]
5. Performing Auto Calibration [96]
6. Checking Auto Calibration results [97]
Calibrating the phase characteristics of the speakers (Automatic Phase Matching)
[98]
Selecting the Auto Calibration type (Calibration Type) [99]
Checking the speaker position and the corresponding speaker terminals (Speaker
Connections) [100]
Selecting the speaker pattern (Speaker Pattern) [101]
Assigning the surround back speaker terminals (SB Speaker Assign) [102]
Assigning the height1 speaker terminals (Height1 SP Assign) [103]
Adjusting the speaker size (Size) [104]
Adjusting the speaker distance (Distance) [105]
Adjusting the speaker level (Level) [106]
Outputting a test tone from each speaker (Test Tone) [107]
Setting the crossover frequency of the speakers (Crossover Frequency) [108]
Adjusting the equalizer (Equalizer) [109]
Lifting up the sound of the center speaker (Center Speaker Lift Up) [110]
Setting the correct angles of the surround speakers (Surround Speaker Position)
[111]
Calibrating speaker positioning (Speaker Relocation) [112]
Setting the height from the floor to the ceiling speakers (Ceiling Height) [113]
Selecting the speaker impedance (Speaker Impedance) [114]
Selecting the unit of measurement (Distance Unit) [115]
Playing back WAV files stored on a USB flash drive [116]
To Next Page
Loading...
