Note
The ARC function only works on the TV connected to the HDMI OUT A jack.
If the Control for HDMI function is activated on the source devices connected to the receiver or the
TV, the interlocking functions only work between the TV and the source devices.
[48] Enjoying Video and Sound Playing AV devices
Watching HDCP 2.2 copyright-protected content
To watch HDCP 2.2 copyright-protected content such as 4K content, connect the receiver and
TV via an HDCP 2.2-compatible HDMI jack. You can only view copyright-protected 4K content
through the HDCP 2.2-compatible HDMI jack connection. For details on whether the TV and 4K
devices are equipped with an HDCP 2.2-compatible HDMI jack, refer to the operating
instructions of the TV and 4K devices.
[49] Enjoying Video and Sound
Listening to the radio
Listening to FM/AM radio
You can listen to FM and AM broadcasts through the built-in tuner. Before operation, be sure
you have connected the FM and AM antennas (aerials) to the receiver.
FM/AM screen (Simple mode)
The Simple mode screen appears in the default setting.
FM/AM screen (Full mode)
You can select and operate each item on the screen by pressing / / / and .
Set the HDMI OUTPUT setting to [HDMI A] on the receiver.
5
Turn off the Control for HDMI function for all devices connected to the receiver
except the TV.
For details, refer to the operating instructions of the connected devices.
6
Turn off any settings for the operation of other devices on the TV’s remote control.
For details on setting the TV, refer to the operating instructions of the TV.
7
Switch the input of the receiver to [TV].
8
Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
The FM/AM screen appears.
To switch the screen mode, press OPTIONS and select [Simple] or [Full] in [FM/AM
Display] from the options menu.
1
Band indication
You can select [FM] or [AM] by pressing the FM or AM.
1.
Frequency indication
You can tune to a station automatically by pressing TUNING +/-. The receiver stops
scanning whenever a station is received.
You can also select a preset station by pressing PRESET +/-.
2.
To Next Page
Loading...
