[50] Enjoying Video and Sound Listening to the radio
Presetting FM/AM radio stations (Preset Memory)
You can store up to 30 FM and 30 AM stations as your favorite stations.
[51] Enjoying Video and Sound
Listening to the radio
Tuning to a station directly (Direct Tuning)
You can enter the frequency of a station directly.
Note
If the tuned frequency is invalid or out of range, [---.-- MHz] or [---- kHz] appears and then the screen
returns to the current frequency.
Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still cannot tune
to a station, the frequency may not be in use in your area.
Hint
Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM
station.
The tuning scale for direct tuning is shown below:
Band indication
You can select [FM] or [AM] by pressing
/ repeatedly.
1.
Frequency indication
You can tune to a station automatically by pressing
/ repeatedly (Auto Tuning).
Press
to scan from lower to higher frequency stations or press to scan from higher to
lower stations.
The receiver stops scanning whenever a station is received.
2.
Preset station list
You can tune to a station by selecting the preset number from the list.
3.
Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
If the Simple mode screen appears, switch to the Full mode screen by pressing OPTIONS
and selecting [Full] in [FM/AM Display] from the options menu.
1
Tune to the station that you want to preset.
2
Press OPTIONS.
3
Select [Preset Memory] from the options menu.
4
Select a preset number.
The station is stored as the selected preset number.
5
Repeat steps 1 to 5 to store another station.
You can store stations as follows:
AM band: AM 1 to AM 30
FM band: FM 1 to FM 30
6
Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
If the Simple mode screen appears, switch to the Full mode screen by pressing OPTIONS
and selecting [Full] in [FM/AM Display] from the options menu.
1
Press
/ / / to select the Frequency indication and then press .
2
Enter the frequency using
/ / / .
3
Press
/ to select a digit.
1.
Press / to change the digit.
2.
Press .
4
To Next Page
Loading...
