Hint
You can check the remaining time before the receiver turns off on the System Setup screen. Also,
the remaining time appears on the bottom right of the TV screen when it becomes 1 minute or less.
The sleep timer will be canceled if you perform the following:
Update the software of the receiver.
Turn the receiver on or off.
[155] Adjusting Settings System Setup
Checking the software version (Software Version)
You can check the current software version of the receiver.
[156] Adjusting Settings
System Setup
Updating the software via the network (Network
Update)
You can update the receiver software via the network.
Connect the receiver to the Internet beforehand, and then make sure [Internet Connection] is
displayed as [OK] in the [Network Information] menu.
[157] Adjusting Settings
System Setup
Updating the software using the USB flash drive (USB
Update)
You can update the receiver software using the USB flash drive.
[158] Adjusting Settings
System Setup
Setting the tuner (Tuner Setup)
You can configure the FM receiving mode (*), Name Input and Preset Gain Level settings.
[159] Adjusting Settings
Install Setup
Turning on control mode for maintenance (External
Select [Setup] - [System Setup] from the home menu.
1
Check [Software Version].
2
Select [Setup] - [System Setup] from the home menu.
1
Select [Network Update].
2
Follow the instructions on the TV screen.
3
Copy the file for updating to the top level directory (just under the root directory) of
the USB flash drive.
1
Connect the USB flash drive to the SETTING
(USB) port of the receiver.
2
Select [Setup] - [System Setup] from the home menu.
3
Select [USB Update].
[UPDATING...XXX%] appears on the display panel while updating. When the update
completes, receiver will restart automatically.
4
This function only works while the [FM TUNER] input is selected.
*
To Next Page
Loading...
