Connecting Your TV
17
Connecting a TV and Satellite Receiver
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏ Program your Sony remote control to operate your satellite receiver (see page 8).
❏ To activate your remote, press to operate your satellite receiver. See page 7 on how
to operate other functions.
❏ Press repeatedly to switch to satellite receiver input (VIDEO input).
1
3
4
5
MONITOR
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
VIDEO
S VIDEO
Y
PB
PR
Satellite receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV
01US01COV-BR2.book Page 17 Tuesday, February 4, 2003 11:51 AM
To Next Page
Loading...
