Connecting Your TV
21
Connecting Two VCRs for Tape Editing
You can connect two VCRs together to edit video tapes. You can also connect both VCRs to
your TV to view the program being recorded.
1 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your first
VCR to AUDIO/VIDEO IN on your TV.
2 Using audio/video cables (not supplied), connect AUDIO/VIDEO IN on the second VCR
to the MONITOR AUDIO/VIDEO OUT on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏ Program your Sony remote control to operate your VCR (see page 7).
❏ To activate your remote press to operate your VCR, see page 7 on how to operate
other functions.
❏ Press repeatedly to switch DVD input (VIDEO inputs).
1
3
4
5
MONITOR
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
VIDEO
S VIDEO
Y
PB
PR
Rear of TV
2
VCR (for playback)
VCR (for recording)
Video (yellow)
Audio L (white)
Audio R (red)
1
01US01COV-BR2.book Page 21 Tuesday, February 4, 2003 11:51 AM
To Next Page
Loading...
