30
Menu Adjustment
4
If you are not satisfied with the picture
and sound quality, you may be able to
improve them by using the “FINE” tuning
feature.
(1) Press V or v to select “FINE”, then press
ENTER.
(2) Press V or v to select “MANUAL”, then
press ENTER.
(3) Press V, v, B or b until the picture and
sound quality are optimal, then press
ENTER.
The + or – icon on the menu flashes
while tuning.
5
If the TV signal is too strong and the
picture is distorted, you can adjust the TV
reception sensitivity.
(1) Press V or v to select “
SENS”, then
press ENTER.
(2) Press V or v to select “LOW”, then press
ENTER.
Note
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV.
To Next Page
Loading...
