For PVM-14M2E:
CRT P-22 phosphor
Power consumption 90 Wh (with SDI: 99 Wh)
Power requirements 100 to 240 V AC, 50/60Hz
Operating temperature
0 to +35°C (32 to 95°F)
Storage temperature -10 to +40°C (14 tol04°F)
Operating humidity 35 to 85% (no condensation)
Storage humidity O to 90%
Dimensions (w/h/d) Approx. 346 x 340 x 431 mm
(13% x 13½ x 17 inches)
not incl. projecting parts and controls
Mass Approx. 16.7kg (36 lb 13 oz)
Accessory supplied AC power cord ( 1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
For PVM-20M4U:
CRT SMPTE-C phosphor
Power consumption 125 Wh (with SDI: 135 Wh)
Power requirements 120 V AC, 50/60Hz
Operating temperature
0 to +35°C (32 to 95°F)
Storage temperature - 10 to +40°C (14 to 104 °F)
Operating humidity 35 to 85% (no condensation)
Storage humidity O to 90%
Dimensions (w/h/d) Approx. 450 x 458 x 503 mm
(17% x 18
1
/2! x 19
7
/s inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
For PVM-20M4E:
CRT EBU phosphor
Power consumption 130 Wh (with SDI: 140 Wh)
Power requirements 100 to 240 V AC, 50/60Hz
Operating temperature
0 to +35°C (32 to 95°F)
Storage temperature -10 to +40°C (14 tol04°F)
Operating humidity 35 to 85% (no condensation)
Storage humidity O to 90%
Dimensions (w/h/d) Approx. 450 x 458 x 503 mm
(17% x 181/s x 19
7
/2! inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord ( 1)
AC plug holder (1)
Tally label (I)
Cable with a 20-pin connector (1)
For PVM-20M2U:
CRT P-22 phosphor
Power consumption 115 Wh (with SDI: 125 Wh)
Power requirements 120 V AC, 50/60Hz
Operating temperature
0 to +35°C (32 to 95°F)
Storage temperature -10 to +40°C (14 tol04°F)
Operating humidity 35 to 85% (no condensation)
Storage humidity O to 90%
Dimensions (w/h/d) Approx. 450 x 458 x 503 mm
(17% x18¼ x 19
7
/2! inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
For PVM-20M2E:
CRT P-22 phosphor
Power consumption 120 Wh (with SDI: 130 Wh)
Power requirements 100 to 240 V AC, 50/60Hz
Operating temperature
0 to +35°C (32 to 95°F)
Storage temperature -10 to +40°C (14 tol04°F)
Operating humidity 35 to 85% (no condensation)
Storage humidity O to 90%
Dimensions (w/h/d) Approx. 450 x 458 x 503 mm
(17% xl8
1
Ai x 19
7
/2! inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (I)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
Design and specifications are subject to change
without notice.
-4-
To Next Page
Loading...
