Sony Trinitron PVM-14M4A - How to Connect a Remote Control Unit; How to Light the Tally Lamp; Pin Assignment; Remote Connector

Pin assignment
Y/C IN connector (4-pin mini-DIN)
Y-input 1 Vp-p, sync negative,
75 ohms
2
CHROMA 300m Vp-p, burst
subcarrier-input Delay time between Y
and C: within O ± 100
nsec., 75 ohms
3
GND for Y-input GND
4
GND for GND
CHROMA-input
REMOTE connector (20-pin)
1
Blue only Brown
2
HNDELAY
Red
3 MAIN/SUB*
Orange
4
EXT SYNC
Yellow
5
DEGAUSS
Green
6 R ch ON/OFF*
Blue
7
TALLY
Purple
8 LINE B
Grey
9 GND
White
10
GND
Black
11
GND Pink
12
GND
13
LINEA
14
LINE/RGB
15
GND
16
L ch ON/OFF*
Spiral Blue
17
REMOTE
Spiral Purple
18
LINE C
Spiral Grey
19
UNDER SCAN
Spiral Pink
20
16:9
Spiral Light Blue
(* For digital audio control)
How to connect a remote control unit
Connect No.17 pin to one of the GND pins (No.9 - 12,
and 15), then connect pins for the functions you want
to use to other GND pins (No.9- 12, and 15).
How to light the tally lamp
Connect No.7 pin to one of the GND pins (No.9 - 12,
and 15).
-5-