How to troubleshoot a blurry picture on a Sony Projector?
If the picture on your Sony Projector is not clear: * The picture may be out of focus. Try adjusting the focus. * Condensation may have occurred on the lens. Leave the projector on for about two hours to allow the condensation to clear.
Why is my Sony Projector picture flickering?
If the picture on your Sony Projector is flickering, it might be because “Phase” in the Screen menu has not been adjusted properly. Adjust 'Phase' in the Screen menu properly.
How do I reduce noise in the picture on my Sony VPL-FE40?
To reduce noise in the picture of your Sony Projector, change the desktop pattern on the connected computer.
What does it mean when the ON/STANDBY light flashes red 6 times on a Sony VPL-FE40?
Unplug the AC power cord from the wall outlet after the ON/STANDBY indicator goes out, plug the power cord to the wall outlet, and then turn the Sony projector on again. If the ON/STANDBY flashes in red and the problem persists, consult with qualified Sony personnel.
What to do if ON/STANDBY flashes in red 4 times on Sony VPL-FE40 Projector?
If the ON/STANDBY indicator on your Sony Projector flashes red with a repetition rate of 4 flashes, the fan is broken. Consult with qualified Sony personnel.
General| Brightness | 4000 lumens |
|---|---|
| Contrast Ratio | 2000:1 |
| Display Technology | 3LCD |
| Projection Size | 30 to 300 inches |
| Resolution | 1024 x 768 pixels (XGA) |
| Lamp Type | UHP |
| Input Terminals | HDMI, VGA, Composite |
To Next Page
