833 User Guide
54
DIMENSIONS (H X W X D)
5.1 cm x 22 cm x 17 cm;
(2.0 in. x 8.7 in. x 6.6 in)
WEIGHT
2.75 lbs (unpackaged, without batteries)
1.25 kg (unpackaged, without batteries)
RECORDING
Internal 256 GB SSD; two removable SD Cards, 10% over-provisioned
for optimum performance
Selectable bit depth 16 or 24-bit
Simultaneous recording to internal SSD and the two SD cards
exFAT formatting
12 tracks (8 iso channels, 4 buses)
Broadcast WAV monophonic and polyphonic le format
64-bit WAV (RF64) monophonic and polyphonic; support for les > 4
G
AAC 2 track at 48 kHz, selectable bit rate 32, 64, 128, 192, 256 kbps
AUTOMATIC MIXING
Dugan Automixing for up to 8 channels on left and right mix bus
MixAssist up to 16-channels on Left and Right bus
NOISE SUPPRESSION
Via optional paid NoiseAssist Plugin
Up to two instances of NoiseAssist can run on any combination of
isolated channels (excluding 17-32 on Scorpio), bus L, or bus R.
USB
USB-C (USB 3.1 type 1) for le transfer of internal SSD, both SD Cards
USB-C 2-in/2 out audio streaming
USB-A host for keyboard, external controller, external USB hubs
supported for connecting multiple devices
TIMECODE AND SYNC
Modes Supported: Off, Rec Run, Free Run, 24h Run, External,
including External Auto-Record and Continuous modes.
Frame Rates: 23.98*, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND
Sample/Timecode Accuracy: 0.1 ppm (0.25 frames per 24 hours)
Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3
dBu)
Timecode Output: 75 ohm impedance, 5 V p-p (+12 dBu)
Word Clock Input: 10k/75 ohm selectable impedance,
1-5 V p-p input sensitivity
Word Clock Output: 75 ohm impedance, 5 V p-p output, at SR
REMOTE CONTROL
Sound Devices CL-12 Linear Fader Controller
USB MIDI MCU Control - supported 3rd party fader controllers
SD-Remote Android app via USB or Bluetooth LE
SD-Remote iPad app via Bluetooth LE
USB Keyboard
External Timecode Record Trigger
LCD
320x240, Transective, excellent sunlight visibility
Larger touchscreen display available via USB-connected SD-Remote
app
POWER
External: 10-18 V input on locking TA4 connector,
pin-4 = (+), pin-1 = (-)
Dual rear-mount Sony-style L-mount batteries with chargers
Current Draw, at 12V no battery charging:
All mic preamps off: 730 mA
All mic preamps on: 920 mA
All mic preamps on, 192 kHz sample rate, recording to internal SSD
and 2 SD Cards: 1.07 A
Intelligent power-down of unused mic preamps and other internal
circuits
Smart Battery telemetry supported via DC Input
ENVIRONMENTAL
Operating: -20° C to 60° C, 0 to 90% relative humidity (non-condens-
ing)
Storage: -40° C to 85° C
To Next Page
Loading...
Need help?
General
