ST2683A Operation Manual Ver.1.3
15
3.2.10 MEAS DISP
This function is used for setting the MEAS DISP of the instrument as ON/OFF.
Steps for MEAS DISP:
Touch the corresponding zone. The following items will be displayed in the soft key zone.
ON
It is used for setting the MEAS DISP as ON.
OFF
It is used for setting the MEAS DISP as OFF.
Touch the corresponding key in soft key zone to select the relevant function.
Touch the soft key PICKOUT SETUP to enter into the <PICKOUT SETUP> page as shown in figure 3-
3.
Figure 3-3 PICKOUT SETUP
The comparator functions of the instrument can be set on this page. ST2683A can set three groups
of limit values for primary parameters.
The function in
troductio
n of <PICK
OUT SETUP> pag
e
3.3.1 PICK FUNC
This function is used for controlling the switch of the instrument pickout function.
Steps for PICK FUNC:
Touch the corresponding zone. The following items will be displayed in the soft key zone.
To Next Page
Loading...