Sourcetronic ST2683A - SYSTem Subsystem Commands

ST2683A Operation Manual Ver.1.3
47
For example: WrtCmd(“COMP:BLIM ON”)
Query Syntax: COMParator: BLIMitvalue?
Return format: <NR1><NL^END>
The :ORESultcommand sets the bin output results type of the instrument.
COMParator:ORESult? query returns to the current bin output results type.
Command syntax:
LEVel
COMParator:ORESult
PULSe
Where,
LEVel set the bin output results type as LEVel
PULSe set the bin output results type as PULSe
For example: WrtCmd(“COMP:ORES LEV”)
Query syntax: COMParator:ORES?
Return format:
LEVel
<NL^END>
PULSe
The :PWIDth command is usd to set the Handler bin output pulse width of the instrument.
The :PWIDth? query returns to the current Handler bin output pulse width.
Command syntax: COMParator: PWIDth <value>
Where,
<value> is any integer value among the range (1-25ms) of Handler bin output pulse width.
For example: WrtCmd (“FUNCtion:PWID 10”); set the Handler bin output pulse width as 10ms..
Query syntax: FUNCtion: PWIDth?
Return format:<value><NL^END>
The command query returns to the current Handler bin output pulse width.
7.2.7 SYSTem Subsystem Commands
Command tree: