Sourcetronic ST2683A - Mass MEMory Subsystem Commands

ST2683A Operation Manual Ver.1.3
48
The :SYSTem:BEEP OFF (0) and ON (1) commands are used to set and query the system beeper of
the instrument.
For example:
SYST:BEEP 0 turn off the beeper
Query Syntax:
SYST:BEEP?
Return format: 0 or 1
SYSTem:VERSion? It can query the current version number of the instrument, for example: Ver
1.00
SYSTem:STSTus? It can query the current status of the instrument.
Return format: DISCharging (indicating the syatem is in discharging), TESTing (indicating the system
is in test).
The SYSTem:HPOWer INTernal or EXTernalcommands are used to set the Handler interface power.
Command syntax: SYSTem:HPOWer INTernal set the HANDler power as INTernal.
Query Syntax: SYSTem:HPOWer?
Return format: INTernal (indicating the current HANDler power is INTernal), EXTernal (indicating
the current HANDler power is EXTernal).
7.2.8 Mass MEMory Subsystem Commands
Mass MEMory subsystem commands are used to set the storing and loading of the files (specific
to the internal files).
Command tree:
Mass MEMory :LOAD :STATe <record number>
:STORe :STATe <record number>
The :LOAD:STATe command is used to load the files stored.
Command syntax: MMEMory:LOAD:STATe <value>