ST2683A Operation Manual Ver.1.3
46
:BEEPer BONe
BTWo
BSTRee
NG
OFF
The above commands are used to specify the indication of beeper toward pickout results or turn
off the beeper function.
Command syntax:
COMParator:BEEPer BONe it beeps when the beeper passes BIN1
COMParator:BEEPer BTWo it beeps when the beeper passes BIN2
COMParator:BEEPer BSTRee it beeps when the beeper passes BIN3
COMParator:BEEPer NG it beeps when three bins of the beeper all failed
COMParator:BEEPer OFF turn off the beeper function
Query Syntax:
COMParator:BEEPer?
Return format:
BONe, BTWo, BSTRee, NG, OFF
The :BDISplay command is used to set the bin display of the instrument as ON or OFF.
The :BDISplay? query returns to the current bin display state.
Command syntax:
ON(1)
COMParator: BDISplay
OFF(0)
Where,
Character 1 (integer:49) means ON.
Character 0 (integer: 48) means OFF.
For example: WrtCmd(“COMP:BDIS ON”)
Query Syntax: COMParator: BDISplay?
Return format: <NR1><NL^END>
The : BLIMitvalue command is used to set the bin limit value of the instrument as ON or OFF.
The: BLIMitvalue? query returns to the current bin limit value.
Command syntax:
ON(1)
COMParator: BLIMitvalue
OFF(0)
Where,
Character 1 (integer:49) means ON.
Character 0 (integer: 48) means OFF.
To Next Page
Loading...