Page 9
Safety Instructions (cont.)
21. Maintain Tools with Care. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories.
Never use damaged power cords.
Inspect tool cords periodically and if damaged, repair with proper Spartan replacement parts.
Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean, and free from oil and grease.
22. Check Damaged Parts. Before further use of the tool, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.
Replace defective switches with proper Spartan replacement parts.
Do not use tool if switch does not turn on and off.
23. Store Idle Tools. When not in use, tools should be stored in a dry and locked up place, away from
children.
24. Handling Cables. Be very careful when cleaning drains exposed to cleaning compounds. Wear
protective gloves when handling cable, and avoid direct contact of skin and especially the eyes
and facial areas as serious burns can result from some drain cleaning compounds.
To Next Page
Loading...
