Spartan 1065 - Introduction and Setup

Page 44
The Spartan Tool Model 75 Power Cable Feed with “dial-a-cable” reflects the latest improvements
in the marketplace. The operation, repair and maintenance of the Model 75 are simple to accomplish.
These features allow a quick change for cable size and provide easy maintenance. The Model 75,
which weighs just over 10 pounds, will feed and retrieve a cable up to 30 feet per minute.
A universal mounting plate allows adaptation to current Spartan Model 1065’s, 200’s, 300’s, and
100’s. (The Model 2001 does not need a mounting plate.) The power cable feed can be used on
cable size from 5/16” through 3/4”.
Spartan Tool, L.L.C. strongly recommends the use of a Spartan Cable Safety Guide (44225300)
with the Model 75 Power Cable Feed unit. (See Fig. 1) The Cable Safety Guide attaches to the front
of the Model 75 unit, and is intended to help protect the operator from possible cable buckling and
other hazards associated with handling rotating cable. Contact Spartan Tool, L.L.C. (800 435 3866)
or www.spartantool.com with questions regarding the Cable Safety Guide.
Introduction