Digital Display Area up to 99.9 M/h
(99.9 Km/h) with a resolution of 0.1
M/h (0.1 Km/h)
Maximum Speed (MXSPD)
The maximum speed is shown by
a short “Needle-Tip” that will usually
be above the current speed needle
(unless the current speed equals
the Maximum Speed). The maximum
speed is retained in memory and
updated when a higher speed is
maintained for three seconds. The
maximum speed can be reset by
pressing the “SET” button for three
seconds. (See figure 14) The
Maximum Speed is also shown on
18
To Next Page
Loading...
