“modes” (i.e. odometer mode, dis-
tance mode). The computer can be
cycled through these modes by press-
ing the “MODE” button located on the
right-hand side of the housing. There
are nine cycling modes available:
1) Speed Mode, 2) Average Speed
Mode, 3) Maximum Speed Mode,
4) Odometer Mode, 5) Trip Distance
Mode, 6) Auto-timer Mode,
7) Stopwatch Mode, 8) Interval Timer
Mode and 9) Distance Countdown
Mode. Once you familiarize yourself
with the mode selection operation
you will find it very easy to navigate.
The following flowchart outlines the
mode/side-mode sequence.
Once a particular mode has been
entered, its values can be reset or
adjusted by pressing and holding the
“SET ” button for three seconds. Some
operations may require that you use
a combination of the “MODE” and
“SET” and “TOP” buttons.
1. Setting the Display Language
Your SpeedZone Comp can display
information on the dot-matrix display
area in six different languages:
English (ENGL), German (GER), French
(FR), Italian (ITA), Dutch (NED), and
Spanish (ESP). To select your language,
depress hold the “MODE”, “SET” and
“TOP” buttons simultaneously for three
seconds. The selected language will
be displayed. Use the “MODE” button
to scroll through the languages. When
the selected language is displayed
(default language is English), press the
7
To Next Page
Loading...
