EasyManua.ls Logo

Specialized SpeedZone - Troubleshooting; Resolving Common Issues

Specialized SpeedZone
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Clock
Your SpeedZone Comp is equipped
with a digital clock, which can be
accessed from any other mode by
pressing the “MODE” button for three
seconds. The clock can be set to
operate in either 12 or 24-hour mode.
TROUBLESHOOTING
Display is blank:
Change the battery or press the
AC button on the bottom of the case
Display shows partial digits:
Press the AC button on the bottom
of the case.
Speed/distance not recording:
Check sensor/magnet alignment.
Make sure that the sensor is no
more than 1/16” (2mm) from
the magnet.
Entire screen is dark:
Did you leave the bike parked
in the hot direct sun when it was
parked? If so, move the bike to
the shade. The data will be OK.
Computer moves on handlebar:
Tighten mount or add sizing straps
to improve fit on handlebar.
21

Related product manuals