6. Timer Selection
The SpeedZone Comp has two
timers; Automatic Timer Mode (ATM)
and Timer Mode (TIMER). The ATM
selection allows you to keep track
of your actual riding time. The timer
only operates when the wheel is
rotating and cannot be turned on
or off manually.
Note: The average speed
(AVSPD) calculation is based upon
the ATM time.
The TIMER selection is just like a
conventional stopwatch. The timer is
activated manually and records the
time whether the wheel is rotating or
not. Tapping the “TOP” button starts
and stops the stopwatch and holding
the “SET” button for three seconds will
reset to stopwatch. The TIMER includes
a 12-memory lap time feature.
To record a lap time, press the “SET”
button once while the stopwatch is
running. Each time the “SET” button
is depressed the SpeedZone Comp
will record the lap time. After the
TIMER has been stopped (by pressing
the “TOP” button) the previous twelve
lap times can be reviewed by pressing
“SET” button. Additionally, the com-
puter will display the total time when
LPTOT is shown.
7. Interval Timer (INT)
Your SpeedZone Comp is equipped
with an Interval Timer. This feature
allows you to customize your training
by integrating a programmable
repeating countdown timer into your
workout. To enter the interval timer
15
To Next Page
Loading...
