the Digital Display Area up to 99.9
M/h (99.9 Km/h) with a resolution of
0.1 M/h (0.1 Km/h)
Auto Start/Stop Timer (ATM)
In ATM mode the timer function
records the actual time spent riding.
It operates only when there is speed
input and is displayed In the Digital
Display Area of the screen
Timer Mode (TIMER)
In TIMER mode the stopwatch function
will operate when the “TOP” button is
pressed. The stopwatch will record the
total time after the button is pressed
regardless of whether there is speed
input or not.
Interval Timer (INT)
The interval timer is displayed on
the lower line of the screen when
(INT) appears on the left. The timer
indicates the end of an interval with
one short beep per second for the
last 4 seconds of the interval. This is
followed by a long beep, indicating
the beginning of a new interval.
Trip Distance (TRIP)
Trip distance mode will record up to
999.99 miles or kilometers and then
roll to zero. The trip distance SET can
be reset by pressing the “SET” button
for three seconds. The resolution is
0.01 miles (0.01 Kilometers). The trip
distance is shown on the lower line
if the screen. (See figure 15)
19
To Next Page
Loading...
