Spectra Precision FOCUS 35 - Page 113

Chapter 4
Troubleshooting
P/N 79000035_SM, Version 1.5 4 - 27 Focus 30/35 Service Manual
FI_Angle_HZ
Performance
Value Value description Status Ok Counter Error Counter
A
Meas events Ok 1302
Counter of
succesful angle
readings.
0- Ok status
1- Error message
B Meas event timeout Ok - 1- Error message
C Warning flags Ok - 1- Error message
D Error flags Ok - 0- Ok status
1- Error message
Additional results
perfoming a
Diagnostics:
B1 Could NOT read
1000 Hz angle
readings.
Item System Monitor messages
and message codes stored in
*.fsmx file
Error Log stored in
*.irep file
Recommendation
01 H-angle sensor measurement
failed
H angle sensor reading error
A A1 C D
Drive system Turn event
error warning 6 B D1
FI: 20 Code: 0x9c54
Message: Angle
measurement faile
FI: 10 Code: 0xf002
Message: Angle
measurement failed
Error: 0x9868 (39016) brown
out reset dedected
Fsmxfile Hz: reading error 6
A C D = error
LED right or left demaged
Exchange Base unit.
02 H-angle sensor measurement
failed
H angle sensor reading error
A A1
Drive system Turn event
error warning 6 B D1
FI: 20 Code: 0x9c54
Message: Angle
measurement faile
FI: 10 Code: 0xf002
Message: Angle
measurement failed
Error: 0x9868 (39016) brown
out reset dedected
Fsmxfile Hz: reading error 6
A = error
LED right or left demaged
Exchange Base unit.