Spectra Precision FOCUS 35 - Tilt sensor; Exchange Tilt sensor

Chapter 5
Maintenance and Repair
Focus 30/35 Service Manual 5 - 70 P/N 79000035_SM, Version 1.5
Tilt sensor
• Exchange Tilt sensor
Tools and equipment
Exchange Tilt sensor
Bevor you start the dismantling, drive the Horizontal fine drive to the Start position, see Item 6 in
Servo drive test Hz/V.
Performance
Description Part number
Torx T8 bit Local tool
Torque wrench 120 Ncm T71600280
Item Performance Action Result Notes
1 Remove Side cover
right.
see page 5-27
2 Remove Side cover
left.
see page 5-31
3 Remove Optical
plummet.
see page 5-68
4 Remove Control
unit F2.
see page 5-65
5 Remove Base part. see page 5-45
6 Remove Slip
contacts Hz, Board
SCH.
see page 5-72
7 Remove Coarse
drive lever arm
according the
installed version.
Disassembly/ assembly
Coarse drive lever
arm,see page 5-109 or
Disassembly/ assembly
adjustable Coarse drive
lever arm see page 5-
111
The complete
Coarse and Fine
drive has to be taken
out.
Only the divided
lever arm has to be
taken out