Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 19 Focus 30/35 Service Manual
Erecting the Reticle F30
Performance
Fig. 6-12 Check HA / VA collimation - CV value out of tolerance
Item Performance Action Result Notes
1 Start up instrument /
PASS.
See “Connect to the Unit”
on page 7-3. how to set-up
the instrument.
2 Run the tilt offset. See “Calibration Fine tilt
sensor” on page 6-139.
3 Start Reticle
adjustment.
Select
Reticle adjustment
from
Reticle in
Maintenance & Service.
Item Performance Description Result Notes
To Next Page
Loading...
