Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 46 P/N 79000035_SM, Version 1.5
Check of Reticle illumination
Performance
Item Performance Description Result Notes
1 Start up instrument /
PASS.
See “Connect to the Unit”
on page 7-3. how to set-up
the instrument.
2 Start the test. Select
Reticle illumination
from
Reticle in
Maintenance & Service, see
Fig. 6-33 on page 6-46 .
3 Check brightness in 15
steps.
A. Cover the Front lens
with a black cloth.
B. Select
Check reticle
illumination
check
box.
C. Toggle the 15 steps
of brightness, verify
the visibility by
looking at the reticle
through the eyepiece.
The Reticle
illumination has
to be changing
according the
plus or minus
button.
Fig. 6-33 Check of reticle illumination
To Next Page
Loading...
