Spectra Precision FOCUS 35 - Page 199

Chapter 5
Maintenance and Repair
P/N 79000035_SM, Version 1.5 5 - 69 Focus 30/35 Service Manual
3 Clean and grease
Optical plummet.
A. Clean optical
surface.
B. Apply thin layer of
grease arround the
O-ring.
C. Mount the optical
plummet in reverse
order.
Use alcohol
BEM 34-32 grease
Fig. 5-53 Grease Optical plummet
4 Align optical
plummet.
See page 6-148
5 Mount servo side
cover.
see page 5-27
6 Adjustment and
calibration
What to do after
replacement?
Item Performance Action Result Notes
A
B