Spectra Precision FOCUS 35 - Page 149

Chapter 5
Maintenance and Repair
P/N 79000035_SM, Version 1.5 5 - 19 Focus 30/35 Service Manual
2 Disconnect cables. A. Unplug coaxial
cable.
B. Unscrew the clamp
screw.
C. Pull out the
Reference fibre
ferule.
D. Disconnect TSF-
TLD cable.
E. Unplug the cable of
filter motor.
Allen key 0,7mm
5Ncm/0,44lbfin
Fig. 5-15 Disconnect cables Transmitter
3 Remove
Transmitter unit.
A. Remove two
screws M2,5x12.
B. Remove screw
M2,5x14.
C. Lift off the
Transmitter unit
with Reference
fibre.
Transmitter unit is
delivered with
mounted reference
fibre.
Torx T8
60Ncm/5,31lbfin
Be careful, don’t
scratch the optics.
Item Performance Action Result Notes
A
B
C
D
E